01.
SPINDLE
-
The HSD high-frequency spindle 9.6KW provides a maximum speed up to 24,000RPM as standard.
-
Italian-imported HSD high frequency spindle.
-
The spindle accepts ISO 30 tool shank.
-
The spindle is air cooled.
-
It provides tool shank cleaning effect when changing tool.
02.
CUTTING TOOL COOLING
-
An air blow tube is equipped at the side of the spindle ,which provides direct cooling on the cutting tool. Once the spindle starts running ,air blow starts automatically .
03.
MOVING COLUMNS
-
The moving columns structure greatly saves a lot of space.
-
The double columns move on heavy-duty linear guide ways, featuring great rigidity and stability.
04.
MASSIVE BASE CONSTRUCTION
-
The exclusively designed extra large base structure provides a solid support for the entire machine. This design also features the optimal rigidity and stability of structure.
-
The base is tempered to relieve internal stress, ensuring that tja base is deformation free.
05.
MANUAL CHANGE OF VACUUM VALVE
-
To change the vacuum suction area by means of manual vacuum valve.
06.
INFRARED RAY OPTICAL GRATING
-
During the machine is running, the optical grating is used to prevent any personnel from entering into the working range of the machine. If a person enters into the range, the machine will shut down automatically.
07.
DIRECT DRIVE OF SERVO MOTOR
-
The servo motor directly drives the ball screw and is transmitted through a coupling for backlash free transmission.
08.
PRECISE BALL SCREWS
-
Best performance on high-speed moving and precise orientation.
-
Point-link rolling for spindle and nut of ball-screw, can offer 98% efficiency.
-
Connecting via an rolling steel ball , can offer low torque and high smooth.
-
Three axes driven by servo motors to upgrade the accuracy of machine.
09.
LINEAR AXIS SLIDEWAYS
-
The X, Y,Z axis slide-ways are mounted with precise linear ways with dust proof.
10.
AIR CYLINDER COUNTER-BALANCE
-
The spindle head is counter- balanced by an air cylinder which upgrades machining stability and accuracy.
11.
AUTOMATIC LUBRICATOR
-
The automatic lubricator delivers lubrication oil to all slideways and feed screws,resulting in extremely smooth movements on three axes.
-
Lubrication frequency and oil flow may be adjusted as desired.
12.
MANUAL TOOL ALIGNMENT DEVICE
-
This device will ensure cutting depth accuracy to reach 0.01 m/m.
13.
CONTROL CIRCUIT MEETS CE STANDARDS
-
Equipped with high class components; offer an stable motion.
-
It’s conform to safe regulation in EU.
14.
VACUUM PRESSURE METER
-
Equipped with an electronic detection switch to make sure the work pieces have been fixed securely.
15.
VARIOUS ADVANCED INTERFACES
-
The controller is provided with two ports for online with internet and features USB transfer function.
16.
POWER VACUUM GENERATOR
-
The vacuum generator provides extra powerful vacuum for the table,that holds workpiece securely during machining.
17.
SPINDLE LOAD MONITORING
-
This function allows for monitoring the spindle load status at any time during cutting.In case overload occurs.the machine stops antomatically.
18.
MPG HANDWHEEL
-
The MPG handwheel provides convenient cutting. It is used to move 3 axis, actual cutting test and 3 axis feed speeds adjustment.
-
Minimum setting unit:0.001mm.
19.
CNC CONTROLLER
-
The machine is equipped with a pc based cnc control with powerful functions.
-
Functions of windows CE system
-
Open type human-machine interfacing.
-
USB transfer interface allows for transferring data through internet
-
Chinese / English display.
-
High speed and high accuracy.
-
Start and stop control for antomatic machining cycle and single block execution.
-
Use of general standard PC key pad,mouse and screen for increasing converience of operation.
20.
PANEL POSITIONING PIECE
-
Air change at home point allows panel to position accurately.
-
Repetitive panel positioning eliminates troublesome panel repositioning.
21.
AUXILIARY SWITCHES
-
The outfeed end of the machine is equipped with an auxiliary switch box,making it convenient for operator to operate the machine at the outfeed end without need to the main operation box.
-
4 auxiliary switches including:vacuum switch,cycle start switch,feed hold switch and emergency
Stop switch.
22.
LINEAR MAGAZINE
-
Tool loading capacity 8 or 10 tools.
-
Armless type tool change.
-
Accmodates ISO 30 tool shank.
23.
BALL BAR TESTING
-
A ball bar testing equipment is applied to inspect circularity and geometric accuracy.
24.
LASER INSPECTION
-
Each machine is subject to laser inspections for positioning accuracy,repeatability,screw pitch error and backlash.
-
Full travel positioning accuracy: ±0.03 mm.
